Download project sheet in PDF format
Port of Al Jubail
Port of Al Jubail, overview. Dredging and reclamation area.

Environmental Impact Study Al Jubail, Saudi Arabia

At the industrial port of Al Jubail, Saudi Arabia, new harbour facilities are currently being planned. These facilities will be constructed at an area to be reclaimed. The first part of the required backfill material, with a volume of about 2,600,000 m3, is dredged from the nearby planned new inner harbour basin. The dredged material contains about 5% of fines smaller than 75 µm. Most of these fines will settle during the backfill process. However, the overflow discharge could still contain some fines. With the overflowing water, these fines are disposed into the harbour basin resulting in an increased turbidity there. The disposal of fines into the port area and/or the sea in general is subject to environmental regulations.

The following services were provided:
Determination of hydraulic conditions in the harbour and near the disposal area, interpretation of velocity measurements taken for this project, quantification of the fines in suspension due to the dredging process, dispersal of the fines due to nearfield and farfield mixing.

Client
Sabic Terminal Services Co. (SabTank)

Location
Port of Al Jubail, Saudi Arabia

Date
2000 (study)

Services
Determination of hydraulic conditions, analysis of velocity measurements, assessment of sediment plumes from dredging

Svašek Hydraulics
Schiehaven 13G, P.O. Box 91, 3000AB Rotterdam, The Netherlands
Phone +31 10 467 13 61. Fax +31 10 467 45 59
Internet: www.svasek.com. E-mail: info@svasek.com